Functional Description; Pump - ProMinent Sigma2 S2Cb Operating Instructions Manual

Functional description

5 Functional description

5.1 Pump

Illustration of the stroke movement
s
s
18
The metering pump is an oscillating diaphragm pump, the stroke length of
which can be adjusted. An electric motor drives it. The slide rod transmits
the stoke motion to the diaphragms.
The stroke movement of the displacement body is continuously detected
and regulated so that the stroke is performed according to a previously set
metering profile - see chapter.
The following metering profiles are available:
Normal
n
Metering optimised
n
Priming optimised
n
Every metering profile is ineffective below the switch-
over frequency for Start/Stop mode.
Normal
a)
s
t
0
P_SI_0120_SW
Fig. 8: Stroke movement at a) maximum stroke length and b) reduced
stroke length.
s Stroke velocity
⍵ Cam rotational angle
+ Discharge stroke
- Suction stroke
Metering optimised
With a metering optimised metering profile, the discharge stroke is elon‐
gated and the suction stroke is executed as quickly as possible. This set‐
ting is for example suitable for those applications that require optimum
mixing ratios and the most continuous chemical mixing possible.
t
P_SI_0103_SW
Priming optimised
'Metering' 'setting' .
b)
s
ω
180 360 0 180 360
P_PL_0009_SW
ω