Audio - Lilliput PVM210 Manual

- Auto -
Select [On], the monitor can automatically adjust the position of the image.
manually adjust the position of the image.
- Phase-
Adjust internal phase sequence difference. Adjustable range: 0-100.
- Clock -
Adjust internal oscillation frequency when interference occurs. Adjust this
compressed or stretched left or right. Adjustable
- H-Position -
Horizontally adjust the position of the image on the screen. Adjustable
- V-Position-
Vertically adjust the position of the image on the screen. Adjustable
Note! Only available under VGA mode.

2-2-5. AUDIO

- VGA, VIDEO mode -
AUDIO
- Volume -
To adjust the volume from [0]-[100] for the built in speaker and earphone jack audio signal.
- Level Meter -
The left side of the on screen meters displays level meters showing audio levels for channels 1 and 2 of the
input source. It features peak hold indicators which stay visible for a short time so the user can clearly see
the maximum levels reached.
To achieve optimum audio quality, ensure the audio levels do not reach 0. This is the maximum level,
meaning that any audio that exceeds this level will be clipped, resulting in distortion. Ideally peak audio
levels should fall in the upper end of the green zone. If the peaks enter into the yellow or red zones, the
audio is in danger of clipping.
- SDI mode -
Volume 0 - 100
Level Meter OFF, ON
CH0&1, CH2&3, CH4&5, CH6&7, CH8&9, CH10&11,
Audio Channel
CH12&13, CH14&15
range: 0-100.
range: 0-100.
range: 0-100.
- HDMI mode -
13
Select [Off], users
item, the image can be
can