Determining The Level Of Switch Firmware - Lenovo SI4091 Installation Manual

Determining the Level of Switch Firmware

1. Log on to the Lenovo Flex System Chassis Management Module (CMM)
2. Set the environment to the bay where you installed the switch. For example:
3. Execute the info command to display switch firmware information:
40
SI4091 10Gb System Interconnect Module Installation Guide
After you install the switch in the Lenovo Flex System chassis, make sure that the
latest firmware is installed on the switch. To determine the level of the firmware
that is installed, complete the following steps.
Command-Line Interface (CLI) as described in the CMM documentation. If
necessary, obtain the Internet Protocol (IP) address of the CMM from your system
administrator.
system> env -T system:switch[1]
system:switch[1]> info
...
Boot ROM
Rel date: 04/02/2013
Version: 7.7.1.12
Status: Active
Main application
Rel date: 04/02/2013
Version: 7.7.1.12
Status: Active
Main application
Rel date: 03/22/2013
Version: 7.7.1.12
Status: Inactive