To access this page, click Ethernet Configuration.
The following table describes the items in the previous figure.
Item
Mode
MAC Address
IP Address
Subnet Mask
Default Gateway
DNS
Current Status
IP 1
IP 2
IP 3
Save
Note!
All new configurations will take effect after rebooting. To reboot the
device, click Tools > Reboot.
EKI-1511 Series User Manual
Figure 6.3 Ethernet Configuration
Description
Click the drop-down menu to select the IP Address Setting mode:
Static or DHCP.
Enter the MAC address to which packets are statically forwarded.
Enter a value to specify the IP address of the interface. The default
is 192.168.1.1.
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Click the radio button to select the DNS mode: Automatic or
Specific.
Displays the current IP address 1 of the device.
Displays the current IP address 2 of the device.
Displays the current IP address 3 of the device.
Click Save to save the values and update the screen.
53