Overview; Accessing The Web Page; Accessing The Web Page Via Configuration Utility; Figure 6.1 Accessing The Web Page Via Configuration Utility - Advantech EKI-1511 Series User Manual

6.1

Overview

EKI-1511 Series serial device server can be configured through a web interface. By
using a standard web browser, the same procedure as with the Windows
configuration utility can be used. In the browser's address field, enter the IP Address
of your EKI-1511 Series serial device server. The default IP setting is 10.0.0.1, but
you should use the IP which you have previously assigned for this device. Once the
IP is entered, you will be presented with the following windows.
Note!
Before using the web-based configuration, make sure your host PC
Ethernet network IP domain is as same as the serial device server, or it
can establish the TCP connection with the serial device server.
Note! It is recommended that you use Microsoft Internet Explorer 7.0 or
higher.
6.2

Accessing the Web Page

6.2.1

Accessing the Web Page via Configuration Utility

To access the web page via configuration utility:
1. Select Ethernet under the desired device.
2. Click Launch Browser.

Figure 6.1 Accessing the Web Page via Configuration Utility

EKI-1511 Series User Manual 51