7.
Insert the screws into the wall sinks. Leave a 2 mm gap between the wall and
the screw head to allow for wall mount plate insertion.
8.0 mm
4.0 mm
Note!
8.
Align the wall mount plate over the screws on the wall.
9.
Install the wall mount plate on the screws and slide in the direction to lock it over
the keyhole, see the following figure.
1
1
10.
Once the device is installed on the wall, tighten the screws to secure the device.
2.3.3
Power Adapter Connection
Three types of power adapters are provided to accommodate power requirements.
The adapter types are as follows:
Figure 2.13 Securing Wall Mounting Screws
Make sure the screws dimensions are suitable for use with the wall
mounting plate.
Do not completely tighten the screws into the wall. A final
adjustment may be needed before fully securing the wall mounting
plates on the wall.
2
Figure 2.14 Wall Mount Installation
14
2.0 mm
EKI-1511 Series User Manual