Table of Contents
Advertisement
Modero X Series® Touch Panels
FIG. 5
MXD-700 (Portrait Wall Mount)
MXD-700 Specifications
Power Requirements:
Power Consumption:
Front Panel Components:
NFC Transceiver:
Light Sensor:
Motion Sensor:
Sleep Button:
Microphone:
Speakers:
Rear Panel Components:
USB Port:
Ethernet 10/100 Port:
Touch Panel Display:
Display Type:
Display Size:
Viewable Area
(W x H):
6
Sleep Button
NFC Sensor
PoE (Power over Ethernet), 802.3af, class 3
• Full-On: 8W maximum
• Standby: 3.2 W
• Shutdown: 1 W
Antenna and transceiver for Near Field Communications device detection and
interaction.
Photosensitive light detector for automatic adjustment of the panel brightness.
Proximity detector to wake the panel when it is approached.
• Typical Range: 1 foot (30.48 cm)
• Maximum Range: 3 feet (91.44 cm)
• Range width: 10 degrees
Single button on edge of panel for placing panel in sleep mode, for powering off
the panel, and for accessing the Settings Pages.
-42dB ± 3dB sensitivity FET microphone
4 ohm, 2 Watt, 300Hz cutoff frequency
USB connector used for keyboard and mouse connections, or for firmware
uploads.
10/100 Base-T RJ-45 connector for Ethernet connectivity and PoE.
TFT Active Matrix Color LCD with Fringe Field Switching (FFS) - Wide viewing
angle technology
• Landscape: 7.3" x 4.8" (186 mm x 122 mm), 8.8" (222 mm) diagonal
• Portrait: 4.8" x 7.3" (122 mm x 186 mm), 8.8" (222 mm) diagonal
• Landscape: 6.05" x 3.54" (154 mm x 90 mm), 7.0" (178 mm) diagonal
• Portrait: 3.54" x 6.05" (90 mm x 154 mm), 7.0" (178 mm) diagonal
MXD/T-700 7" Modero X Series® Touch Panels
Advertisement
Table of Contents
