Disabling Beacon Tou; Temporarily Overriding The Tou Scheduler - Generac Power Systems PWRcell XVT076A03 Installation And Owner's Manual

Commissioning
REbus Beacon
TOU Scheduler
disabled
To enable scheduler,
press center button
and select "Enable".
Figure 6-19. Enabling Beacon (1 of 2)
2. Highlight Enable and press the center button.
3. See
Figure 6-20. Arrow right to Confirm and press
the center button.
Rebus Beacon
Enable
Enable
Mod. Settings
Calibrate CTs
Cancel
RCPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Figure 6-20. Enabling Beacon (2 of 2)

Disabling Beacon TOU

The scheduler can be disabled at any time. To disable
the scheduler:
1. See
Figure 6-21. Navigate to the Beacon device
page and press the center button to enter the
device menu.
REbus Beacon
TOU Scheduler
running
Next Change:
To:
Schedule:
Figure 6-21. Disabling Beacon (1 of 3)
2. Highlight Disable and press the center button.
3. See Figure 6-22. Arrow right to Confirm and press
the center button.
36
010118
Menu
Confirm
011140
1h:37m
Self Supply
SDGE
010113
Rebus Beacon
Enable
Disable
Mod. Settings
Calibrate CTs
Cancel
RCPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Figure 6-22. Disabling Beacon (2 of 3)
4. See Figure 6-23. The status line on the Beacon
device page will read Disabled.
NOTE: The system will remain in the current system
mode until the mode is changed manually or the sched-
uler is re-enabled.
REbus Beacon
TOU Scheduler
disabled
To enable scheduler,
press center button
and select "Enable".
Figure 6-23. Disabling Beacon (3 of 3)

Temporarily Overriding the TOU Scheduler

The scheduler can be temporarily overridden at any time
without disabling it. A manual override will apply until the
next regularly scheduled system mode change.
To temporarily override the scheduler:
1. Navigate to the system home page.
2. Press the center button.
3. Select the desired temporary system mode.
When the scheduler has been overridden:
•
Temporary Override will display on the home page,
alternating with the words Scheduler Active and
the name of the current system mode.
•
See Figure 6-24. Running, Overridden will display
on the Beacon device page.
Installation and Owner's Manual for Generac PWRCell Inverter
Menu
Confirm
010117
010118