Enabling Beacon Tou; Disabling Beacon Tou - Generac Power Systems XVT076A03 Installation And Owner's Manual

REbus Beacon
TOU Scheduler
Priority Backup
Next Change:
To:
Schedule:
Figure 6-16. Current System Mode.
See and
Figure 6-17 Figure
the text above the power flow diagram will alternate
between Scheduler Active and the current system mode.
Figure 6-17. Scheduler Active
Figure 6-18. Current System Mode

Enabling Beacon TOU

Once the TOU Schedule is set, the scheduler will auto-
matically enable itself and begin running. However, if the
scheduler becomes disabled for any reason, follow the
instructions below to re-enable the scheduler:
1. See
Figure 6-19. Navigate to the Beacon device
page and press the center button to enter the
device menu.
Installation and Owner's Manual for Generac PWRCell Inverter
1h:37m
Self Supply
SDGE
010114
6-18. On the home page,
010115
010116
REbus Beacon
TOU Scheduler
disabled
To enable scheduler,
press center button
and select "Enable".
Figure 6-19. Enabling Beacon (1 of 2)
2. Highlight Enable and press the center button.
3. See
Figure 6-20. Arrow right to Confirm and press
the center button.
Rebus Beacon
Enable
Enable
Mod. Settings
Calibrate CTs
Cancel
RCPn: 00010003XXXX
< EXIT SCROLL > NEXT • SELECT
Figure 6-20. Enabling Beacon (2 of 2)

Disabling Beacon TOU

The scheduler can be disabled at any time. To disable
the scheduler:
1. See
Figure 6-21. Navigate to the Beacon device
page and press the center button to enter the
device menu.
REbus Beacon
TOU Scheduler
running
Next Change:
To:
Schedule:
Figure 6-21. Disabling Beacon (1 of 3)
2. Highlight Disable and press the center button.
3. See Figure 6-22. Arrow right to Confirm and press
the center button.
Commissioning
010118
Menu
Confirm
011140
1h:37m
Self Supply
SDGE
010113
31