Keysight Technologies N778 B Series Getting Started Manual page 47

Keysight N778xB Getting Started Guide
Network Access
Measurements are stored in D:\My Documents\My PolarizationNavigator
Files and D:\My Documents\My PolarizationNavigator History.
You can access these files from a remote computer by using the Windows
Explorer, the Internet Explorer or an FTP client. When connected through a
local area network, you can use the instruments name, which is its serial
number to access the folders, e.g.:
ftp://DE47800301/Measurements/
ftp://DE47800301/History/
When connected through the internet, you have to use the IP address of
the instrument to access the folders, e.g.
ftp://192.168.0.1/Measurements/
ftp://192.168.0.1/History/
For accessing these folders, you have to login with the following
information
User: Administrator
Password: sphere314
You can find the IP address of the instrument by using the corresponding
NOTE
polarizationNAVIGATOR™ function from the Tools menu or by running
the ipconfig command from the command prompt if you have a
keyboard connected.
When using the Internet Explorer, you have to make sure that FTP is set
NOTE
to active mode. You can do this by opening the menu Tools, choosing
Internet Options..., selecting the tab Ad vanced and removing the mark
from Use passive FTP (for Firewall and DSL modem compatibility) in the
section Browsing. This may also apply when using other FTP tools.
Getting Started 1
47