Keysight Technologies N778 B Series Getting Started Manual page 29

Keysight N778xB Getting Started Guide
Please install the Photonic Application Suite (Main) package before you
NOTE
plug in any Keysight N778xB instrument(s) to the USB port of the PC!
This ensures that the drivers are available when you plug-in the
instrument(s). If you have connected the instrument(s) prior to software
installation, you may have to delete the instrument(s) manually from the
Windows Device Manager. This does not apply to instruments that are
connected via GPIB.
The polarizationNAVIGATOR™ software is pre-installed on N778xBD
instruments.
To install the polarizationNAVIGATOR™ on a personal computer for use
with N778xB instruments use the CD supplied with the instrument.
The Package Manager software is used to install and update the different
packages of the Photonic Application Suite, including the
polarizationNAVIGATOR™.
The Package Manager should start automatically once you put the CD into
the drive. Otherwise run "setup.exe" from the CD root directory.
If you downloaded the Package Manager from the Keysight web, site run
"setup.exe" from the download folder.
If an Internet connection is available, the Package Manager will check
NOTE
whether newer packages are available on the Keysight Update Server.
Using the same mechanism, the Package Manager will update itself if a
newer version is found on the Update Server.
Getting Started 1
29