Table of Contents
Advertisement
Firmware upgrade
➢
Refer to URMET S.p.A. Customer Service Technical Assistance periodically to check availability of
firmware upgrades.
Network configuration
➢
Camera default setting is DHCP mode. If the network does not support dynamic addressing (DHCP), the
device will automatically switch to factory IP 192.168.1.168. Use Urmet "Device Config Tool" software to
modify the IP address and other network settings to prevent any conflict with other devices on the
network.
➢
Once the camera is correctly connected and configured on the IP network it will be possible to show video
and settings on any PC or smartphone.
Network connections
➢
When connecting a PC (using Software Client or Browser), any video channel on the PC will be using
"unicast" connection (TCP, RTP, UDP).
The device can support up to 10 "unicast" connections so it is possible to show the video on maximum 10
➢
remote devices (PC or smartphone) at the same time depending on the available network band.
DS1099-024B
7
Advertisement
Table of Contents
