Ip Filter; Rtsp - urmet domus 1099 User Manual

10.3.5

IP FILTER

Select IP Filter in the Network menu to open the following page:
•
Filtering mode: Three modes are available (Allow all IP connections, Allow only IP connections which have been
set up, Do not Allow the IP connections which have been set up).
•
Add: This adds an allowed or prohibited IP address.
•
Delete: This deletes any IP address added previously.
•
Refresh: this updates the values.
•
Save: this saves the set values.
10.3.6

RTSP

Select RTSP in the Network menu to open the following page:
•
RTSPEnable: Enables or excludes RTSP. RTSP is enabled by default. If disabled, it cannot be found with
ONVIF.
•
RTSP Port: The default port number is 554 and it can be changed by setting another value between 1024 and
65535. Changing this parameter will restart the system.
DS1099-024B 26