urmet domus 1099 User Manual page 15

Eight different angles can be selected on the circular control,
•
PTZ Speed: 0 – 10 indicates different PTZ speeds,
•
ZOOM zooms in and out
•
FOCUS increases or decreases FOCUS
•
Restore: resets default settings
On Auto Focus cameras with DF optics, the PTZ interface will be as follows:
DS1099-024B
Option Value
Zoom Step/-/+
Focus Step/-/+
SEMI  AUTO 
AF MODE
MANUAL  OFF
ONE SHOT AF
ON  OFF
TDN AF
SAVE POSI  OFF
POWER MODE
 WIDE
AutoFocus
Restore
Refresh
15
Manually adjusts zoom (+ zoom in / - zoom out)
Step: defines zooming speed
Manually adjusts focus (+ increase / - decrease)
Step: defines focusing speed
This function is used to customise the camera focusing
mode. Possible options are:
SEMI: focusing is performed only after the zooming
operations are finished.
AUTO: focusing is adjusted automatically.
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required
(recommended choice).
/
Function not available.
This function, when activate, allows automatic focus
adjustment at each day->night or night->day switch.
This is used to adjust the zoom whenever the camera is
switched back on.
SAVE POSI: this holds the zoom position set before the
camera was switched off.
OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
/
Adjusts focus automatically
/
Resets PTZ interface default settings (including focus)
Updates the PTZ interface with changes to parameters
/
(including focus)
Explanation