Table of Contents
Advertisement
2.6
Intended use
The automatic spray gun serves the purpose of automatic coating of metal, plastic, ceramic,
wood, as well as other suitable surfaces, dosing of fluids, placement of adhesive and marking
points. Typical coating materials include paints, dyes, water-soluble paints, adhesives, glazes,
enamels, debonding agents etc.
The automatic spray gun can be operated both as an independent device as well as in a larger
system (e.g. as a component of a fully-automatic coating system as well as a spray robot).
Intended use also includes adherence to all the specifications in this manual.
Any use beyond the intended use or any other use constitutes improper use.
WARNING!
Danger due to improper use!
Improper use of the automatic spray gun can cause dangerous situations.
–
Only carry out the installation and commissioning according to the steps described in this
operating manual.
–
Make sure that the utilised hose lines fulfil the requirements with respect to pressure,
chemical and mechanical loads.
–
Always observe the applicable country-specific safety, accident prevention, occupational
safety, and environmental protection regulations for the area of use for the automatic
spray gun.
–
Do not use sharply abrasive, chemically aggressive, very hot or very cold spray media
without first consulting with and receiving approval from Krautzberger GmbH.
–
Adhere to the spray media manufacturer's safety data sheets.
–
Only use the manufacturer's original spare parts.
–
Only operate the automatic spray gun after proper fastening on a suitable carrier con-
struction.
–
Do not hold the automatic spray gun in your hand during operation.
–
Only operate the automatic spray gun while adhering to the values specified in the
Ä Chapter 12 'Technical data' on page 39).
(
–
Make sure that the connected compressed air is oil-free and free of solid matter.
–
Operate the automatic spray gun with processed, dried compressed air (air quality pur-
suant to DIN ISO 8573-1: grade 4).
–
Never point the compressed air at living beings.
–
Do not operate the automatic spray gun in areas that are at risk for explosions.
No claims of any type can be asserted due to damage resulting from improper use.
GB–10
Operating instructions
T-Dok-040-GB-Rev.1
mail@krautzberger.com, www.krautzberger.com
Advertisement
Table of Contents
