How To Search For A Satellite - Furuno FELCOM251 Operator's Manual

3.4.2

How to search for a satellite

Note: Satellite settings are saved inside the Communication Unit. You can also ac-
cess these settings from the Web interface (see section 5.7).
You can set to automatically or manually search and track satellites.
1. In the [Comm. Unit] menu, press
the Enter key.
The [SAT Selection] screen appears.
Note: You can also press
2. Press
AUTO: Automatically select a satellite based on own ship position.
APAC/EMEA/AMER/MEAS: Select the fleet broadband service area to use. See
the following map for each service area.
EMEA EMEA
Name: APAC
Name: EMEA
Name: AMER
Name: MEAS
3. Press the Enter key to confirm the setting.
The message "Wait response..." appears, followed by "Request completed.
Check the status." when the process is complete.
4. Press the
or to select [AUTO], [APAC], [EMEA], [AMER], or [MEAS].
MEAS MEAS
Note: This map is supplied as a reference only and is in
not a guarantee of service in any of the indicated areas.
key to go back to the main screen.
3. SETTINGS FOR IP HANDSET
or to select the [Satellite] menu, then press
to open the [SAT Selection] screen.
APAC APAC AMER AMER
3-7