Step 4: View Leds - Proxim ORiNOCO AP-9100 Hardware Installation Manual

•
Unplug the RJ45 connector from the Data & Power Out port on the DC injector, if using the Gigabit Ethernet PoE.

2.4.5.4 Step 4: View LEDs

When the device is powered on, it performs startup diagnostics. When startup is complete, the LEDs show the operational
state of the device. Tabulated below is the behavior of the four LEDs on the device.
LED Symbol
Ethernet
LED
5 GHz
LED
2.4 GHz
LED
Power
LED
: When the Reload button is pressed, the Power LED blinks in green.
®
ORiNOCO 802.11n & 802.11ac Access Points - Hardware Installation Guide
• Glows green when the AP-9100 device is connected to a 1 Gbps link.
• Blinks green when the AP-9100 device traffic is being transmitted or
received on the 1 Gbps link.
• Glows amber when the AP-9100 device is connected to a 100 Mbps
link.
• Blinks amber when the AP-9100 device traffic is being transmitted or
received on the 100 Mbps link.
• Glows yellow when the AP-9100 device is connected to a 10 Mbps link.
• Blinks yellow when the AP-9100 device traffic is being transmitted or
received on the 10 Mbps link.
• Glows green when the AP-9100 device wireless interface 1 is in
operational state.
• Blinks green when the AP-9100 device wireless traffic is being
transmitted or received.
• Glows green when the AP-9100 device wireless interface 2 is in
operational state.
• Blinks green when the AP-9100 device wireless traffic is being
transmitted or received.
• Glows green when the AP-9100 device is switched ON.
Hardware Overview and Installation
Behavior Color
29