®
2.2 ORiNOCO
2.2.1 Hardware Overview
ORiNOCO
Following sections give you hardware overview of AP-800 and AP-8000.
2.2.1.1 LED Indicators
Tabulated below are the four LEDs, that are available on the top panel of the device:
LED
Power LED
Ethernet LED
Wireless Interface
(Radio) 1 LED
Wireless Interface
(Radio) 2 LED
2.2.1.2 Antennas
The AP device comes with 3x3 MIMO omni-directional antennas that are easy to install. Proxim also recommends you an
optional accessory - Range Extender Antenna (REA) with a 3 x RP SMA plug, that can be easily connected to the device.
Installation
Procedure, for details on installation of antennas.
See
–
AP-800 comes with three omni directional antennas.
–
AP-8000 comes with six omni directional antennas, three per radio.
®
ORiNOCO
802.11n & 802.11ac Access Points - Hardware Installation Guide
AP-800 and AP-8000
®
AP-800
Figure 2-1 Device Overview
Symbol
This LED indicates whether the device is switched on/off.
This LED signals the traffic on the wired ethernet LAN.
This LED provides the status of the traffic on wireless interface (radio) 1.
Refer
This LED provides the status of the traffic on wireless interface (radio) 2.
Refer
Device Operational
Modes.
Device Operational
Modes.
Hardware Overview and Installation
®
ORiNOCO
Description
AP-8000
10