Orinoco ® Ap-9100; Front View Of The Device; Led Indicators; Reload - Proxim ORiNOCO AP-9100 Hardware Installation Manual

®
2.4 ORiNOCO

2.4.1 Front View of the Device

The front panel of the device contains the following components:

2.4.1.1 LED Indicators

Tabulated below are the four LEDs, that are available on the front panel of the device:
LED
Ethernet LED
5G (Wireless
Interface 1) LED
2.4G (Wireless
Interface 2) LED
Power LED

2.4.1.2 Reload

Reload button helps to restore the device to factory default configuration, when:
– The device cannot be accessed through web interface or command line interface.
– The device does not initialize.
– The password is lost.
To avoid tampering, you can lock the reload button on the device and disable the reload functionality. For more details, refer
to the Reload feature and Recovery Procedures illustrated in ORiNOCO
Management Guide.
®
ORiNOCO 802.11n & 802.11ac Access Points - Hardware Installation Guide
AP-9100
Figure 2-10 Front View of the AP-9100
Symbol
This LED indicates the status of the traffic over the wired ethernet
LAN.
This LED indicates the status of the traffic over the wireless interface
(radio) 1. Refer
This LED indicates the status of the traffic over the wireless interface
(radio) 2. Refer
This LED indicates whether the device is switched ON/OFF.
Hardware Overview and Installation
Description
Device Operational Modes.
Device Operational Modes.
®
802.11n & 802.11ac Access Points - Software
23