Removing A Hard Drive Carrier From The Hard Drive Bay - Dell E36S Series Owner's Manual

Removing a hard drive carrier from the hard drive bay

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. If connected, disconnect the power and data cables from the hard drive in the hard drive bay.
Steps
Press the retention clips inward and lift the hard drive carrier from the hard drive bay.
Figure 21. Removing a hard drive carrier from the hard drive bay
a. hard drive
b. retention clips on hard drive carrier (2)
c. hard drive power and data cables (2)
Next steps
1. Install the hard drive carrier into the hard drive bay.
2. If disconnected, connect the power and data cables to the hard drives in the hard drive bay.
3. Follow the procedure listed in
Related tasks
Installing a hard drive carrier into the hard drive bay
58 Installing and removing system components
Safety instructions on page 42.
Before working inside your system
After working inside your system
on page 59
on page 43.
on page 43.