Installing A Hard Drive Carrier Into The Hard Drive Cage; Removing A Hard Drive Carrier From The Hard Drive Bay - Dell PowerEdge T130 Owner's Manual

Hide thumbs Also See for PowerEdge T130:
Table of Contents

Advertisement

Installing a hard drive carrier into the hard drive cage

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Follow the procedure listed in
3.
Disconnect all peripherals connected to the control panel assembly.
4.
Remove the bezel.
5.
Remove the power and data cables from the hard drives and optical drive in the hard drive cage.
6.
Remove the hard drive cage.
Steps
Insert the hard drive carrier into the hard drive cage until it clicks into place.
Next steps
1.
Install the hard drive cage.
2.
Reconnect the power and data cables to the hard drives and optical drive in the hard drive cage.
3.
Install the bezel.
4.
Reconnect the peripherals disconnected from the control panel assembly.
5.
Follow the procedure listed in
Related Tasks
Removing the bezel
Removing the hard drive cage
Installing the hard drive cage
Installing the bezel

Removing a hard drive carrier from the hard drive bay

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Follow the procedure listed in
3.
If connected, disconnect the power and data cables from the hard drive in the hard drive bay.
Steps
Press the retention clips inward and lift the hard drive carrier from the hard drive bay.
52
Safety
instructions.
Before working inside your
After working inside your
Safety
instructions.
Before working inside your
system.
system.
system.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents