AURA
handheld NIR - Rev. 2
®
EN_40_070_0030I | AURA
handheld NIR - Rev. 2 | Maintenance and Repair Manual
®
4
Remove the Torx screws on the display side and lift out the display
Unscrew the six Torx screws
Use a TX 8 Torx screwdriver for this.
Carefully lift the display
bolts
are outside the device.
3
Fig. 5 Remove the Torx screws on the display side and lift out the display
on the display side from the housing.
1
straight out of the housing until the two screw
2
Changing the display
1
2
3
11