Save Scanned Data To A Folder As A Pdf File - Brother MFC-J995DW Online User's Manual

Home > Scan > Scan Using the Scan Button on Your Brother Machine
a PDF File

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use either ControlCenter4 (Windows
1. Load your document.
2. Press [Scan] > [to PC] > [to File].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then
press [OK].
4. Do one of the following:
• To change the settings, press [Options] or [Set at Device].
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
To use the [Options] or [Set at Device] setting, a computer with either ControlCenter4 (Windows
or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
5. Select the scan settings you want to change, and then press [OK].
Option
Scan Type
Resolution
File Type
Document Size
Brightness
Contrast
ADF Auto Deskew
(Available only for certain models)
®
) or Brother iPrint&Scan (Mac) software.
Description
Select the scan type for your document.
Select the scan resolution for your document.
Select the file format for your document.
Select your document size.
Select the brightness level.
Select the contrast level.
Correct any skewed documents when they are scanned using the ADF.
> Save Scanned Data to a Folder as
®
)
96