Brother MFC-J995DW Online User's Manual page 617

Level 1 Level 2
WLAN TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code -
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
NFC -
Message from Message from
Brother Brother
Status
Web Connect Proxy Settings
Settings
Network I/F -
Level 3 Level 4 Descriptions
IPv6 -
- -
- -
- -
-
Status
-
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address
-
Status -
Signal -
- -
- -
- -
- -
Proxy
-
Connection
Address -
Port -
User Name -
Password -
- -
Turn the IPv6 protocol on or off. For more
information, go to the Brother Solutions
Center at support.brother.com
& Troubleshooting.
Configure your wireless network settings
manually.
Configure your wireless network settings
using the Brother installation disc.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network settings
using the one-button push method.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner,
the LCD always indicates a strong signal.
Turn the Wi-Fi Direct connection on or off.
Turn the NFC function on or off.
Display messages and notifications from
Brother.
Change the Web connection settings.
Select the network connection type.
to see FAQs
610