Save Scanned Data To A Folder As A Pdf File - Brother MFC-J460DW Online User's Manual

Hide thumbs Also See for MFC-J460DW:
Table of Contents

Advertisement

Home >
Scan
>
Scan Using the Scan Button on Your Brother Machine
a PDF File

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
>> MFC-J460DW/MFC-J480DW/MFC-J485DW
>> MFC-J680DW/MFC-J880DW/MFC-J885DW
MFC-J460DW/MFC-J480DW/MFC-J485DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to File] option, and then press OK.
4. If the machine is connected over the network, press a or b to select the computer where you want to send
data, and then press OK.
If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer,
and then press OK.
5. Do one of the following:
To change the settings, go to the next step.
To use the default settings, press Black Start or Color Start.
[Scan Type] depends on the default settings. Pressing Black Start or Color Start does not allow you to
change the settings.
6. Press a or b to select the [Scan Settings] option, and then press OK.
To use the [Scan Settings] option, a computer with the ControlCenter software installed must be
connected to the machine.
7. Press a or b to select the [Set at Device] option, and then press OK.
8. Select the scan settings you want to change, and then press OK.
Option
Scan Type
Resolution
Description
Select the scan type for your document.
Select the scan resolution for your document.
> Save Scanned Data to a Folder as
111

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j480dwMfc-j880dwMfc-j885dwMfc-j485dwMfc-j680dw

Table of Contents