Sc6Xx: Device Communication - Ricoh Bc-C1 Field Service Manual

SC No. Level
559-00 A

SC6xx: Device Communication

SC No. Level
622-00 B
Error Name/Error Condition/Major Cause/Solution
Fusing jam SC
A fusing jam, which does not reach the paper exit sensor, is detected
three times consecutively.
• If paper exits normally (passes the paper exit sensor), the count will
be cleared.
• This detection is effective only when the setting of SP1-159-001
(Fusing jam 3 times SC setting) is set to "1 (on)". (Default: 0 (off))
• The fusing jam counter value is retained after turning the power
off/on.
• The fusing jam counter (internal counter) is reset when the setting of
SP1-159-001 is changed from "1" to "0".
• The fusing jam counter is reset when clearing this SC after
SC559-00 has been issued.
Paper winding around the fusing roller.
• Replace the fusing unit.
• Clear this SC by executing SP5-810-001.
Error Name/Error Condition/Major Cause/Solution
2nd tray communication error
• An error occurs during the line connection between the mainframe
and the optional PFU (2nd tray).
• A communication error report is received between the mainframe
and the optional PFU (2nd tray) is received.
• The 2nd paper tray's main board defective
• MPU defective
• 2nd tray and the machine are not connected correctly.
• Reconnect the 2nd tray connection cable.
• Replace MPU.
• Replace the 2nd tray.
SC Code Descriptions
227