Engine Maintenance Mode - Ricoh M099 Service Training

Engine Maintenance Mode

To enter Engine Maintenance Mode
MF models: Press these keys in the following order:
Clear/Stop, 1, 0, 7, Color Start.
Printer models: While holding the Stop/Start and Escape
keys, turn on the main switch.
"Maintenance Mode" is displayed on the LCD.
Selecting an Item
To select an item, press the "Up" or "Down" key.
Going into the Next Level/Returning to the Previous Level
To go into the next level of an item, select an item then
press the "OK" key.
To return to the previous level of an item, press the "Return"
key.
Exiting the Engine Maintenance Mode Menu
To exit the maintenance mode menu, press the
"Clear/Stop" or "Return" key until the "Ready" display
appears.
Slide 47
In previous models of this series, the procedure for MF models was different
from printer models. But this series does not use SOM, so the procedures are
the same.
47
PE-MF3/PE-P2 Training