23.
Install the toner bottle [A] on the holder [B], and then set the holder in the machine.
24.
Paste the decals on the specified locations.
[A]: Copy inhibit decal
[B]: Tray number decal
[C]: Paper size decal
25.
Pull out the paper tray, and then adjust the positions of the end and side guides.
26.
Plug in the main power cord and turn on the main switch.
27.
Activate the SP mode and execute "Developer Initialization" (SP2-801-001).
28.
Wait until the message "Execute Result = OK" shows (about 2 minutes) and then press the
"OK" key.
29.
Activate the User Tools and select the "Language" menu.
30.
Specify a language. This language is used for the operation panel.
Copier Installation
37