Ricoh Bc-C1 Field Service Manual page 164

5. System Maintenance
2-301-053 1side:Thic2:Trail
2-301-111 2side:Plai1:Image
2-301-112 2side:Plai1:Lead
2-301-113 2side:Plai1:Trail
2-301-121 2side:Plai2:Image
2-301-122 2side:Plai2:Lead
2-301-123 2side:Plai2:Trail
2-301-131 2side:Mid:Image
2-301-132 2sideMid:Lead
2-301-133 2side:Mid:Trail
2302 [Transfer Curr Tim]
2-302-001 Lead Edge
Sets to change the image transfer electric current position that is based on the FGATE
assert.
2-302-002 Trail Edge
Sets to change the image transfer off position that is based on the FGATE negation.
2303 [Transfer Clean Bi]
2-303-001 Positive
Adjusts when backside contamination occurred that is caused by reverse polarity toner
on the transfer roller or weak charging toner on the drum.
2-303-002 Negative
Adjusts to improve the toner cleaning performance adhered on the transfer roller due
to paper jamming etc...
2-303-003 Deve Warmup -
Adjusts to improve the toner cleaning performance at the development bias activating.
162
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-8 to 8 / 0 / 1 uA / step]
*ENG [-10 to 120 / 5 / 1 mm / step]
*ENG [-10 to 35 / 3 / 1 mm / step]
*ENG [3 to 20 / 10 / 1 uA / step]
*ENG [0 to 20 / 4 / 1 –uA / step]
*ENG [0 to 20 / 4 / 1 –uA / step]