Ricoh Bc-C1 Field Service Manual page 167

2-906-001 Shift Range
Shifts the image position at the intervals specified by SP2-906-002. When the copier
is continuously printing vertical lines (such as in tables), the paper may not separate
correctly. This SP can prevent this.
2-906-002 Number of Sheets
Changes the interval of the image position shift specified by SP2-906-001.
2908 [Forced Toner Supp]
2-908-001 -
Supplies the toner to the development unit. The processing stops under either of the
following conditions:
• The toner density in the development unit reaches the standard level.
• The processing has continued for 2 minutes.
2915 [Polygon Rota Time]
2-915-001 Idling Time ADJ
Adjusts the polygon motor idling time.
2-915-002 Post Idling ADJ
Adjusts the post idling time
2921 [Toner Supply Mode]
2-921-001 Mode Select
2922 [Toner Supply Mode]
2-922-001 [sec]
2-922-002 Coefficient L 2
2-922-003 Coefficient L 3
2-922-004 Coefficient L 4
*ENG [0.0 to 1.0 / 0.0 / 0.1 mm / step]
ENG [0 to 10 / 0 / 1 sheet / step]
ENG [- / - / -]
[Execute]
*ENG [0 to 60 / 15 / 1 sec / step]
*ENG [0 to 60 / 10 / 1 sec / step]
*ENG DFU
*ENG DFU
*ENG DFU
*ENG DFU
*ENG DFU
Engine SP Mode
165