Ricoh Bc-C1 Field Service Manual page 166

5. System Maintenance
2-307-003 Division 3
2801 [Deve Initializati]
2-801-001 Init TD Sen Execu
Executes developer initialization when new PCDU is replaced.
2802 [Developer Mixing]
2-802-001 -
Initializes the developer and checks the TD sensor output (Vt). The machine mixes the
developer for 2 minutes while reading and displaying the Vt value. The machine does
not initialize the TD sensor output. If the machine has not been used for a long period,
prints may have a dirty background. In a case like this, use this SP to mix the
developer. The message "Completed" is displayed when the program ends normally.
2803 [Deve Initializati]
2-803-001 Vtref
Vtref value at the completion of the initial agent configuration
2-803-002 ID Sensor PWM Val
ID sensor PWM value at the time of completion of the initial agent configuration
2-803-003 Initial mu count
2-803-004 Initial Vt Target
2-803-005 Vt Target
2-803-006 Vt Target Corr
2906 [Tailing Control]
164
*ENG [0 to 99/ 24 / 1 deg / step]
ENG [- / - / -]
[Execute]
ENG [- / - / -]
[Execute]
*ENG [0.00 to 9.99 / 2.50 / 0.01 vol / step]
*ENG [0 to 1023 / 0 / 1 /step]
*ENG DFU
*ENG DFU
*ENG DFU
*ENG DFU