Replacement Of Lightening; Mechanical Control; Turbine Operation Control; Lighting - Kernau KBH 07551 X3 Manual Instruction

REPLACEMENT OF LIGHTENING

Before undertaking any operations related to the replacement of lightbulbs,
the hood should be disconnected from the power supply network. If the hood
was corectly disconnected from the power supply, please wiat a few minutes,
and after the cooling the lightbulb, it can be replaced.
CAUTION:
Do not touch light bulb as long as they are hot. Be careful not to touch
directly the halogen bulb with bare hands.
REPLACEMENT ALUMINIUM FILTER
REPLACEMENT OF LIGHTENING
INSTALLATION OF THE KITCHEN HOOD
DIMENSIONS OF THE KITCHEN HOOD
REPLACEMENT CARBON FILTERS

MECHANICAL CONTROL

Turbine operation control:

• „0" – turns off the turbine
• „1" – turbine operation at minimum speed
• „2" – turbine operation at average speed
• „3" – turbine operation at maximum speed
Turbine is started by pressing the selected buton. Higher gear means grates
air flow.

Lighting:

• „Bulb symbol" – pressing the button turns on the lighting. Pressing the
button a second time turns off the lighting.
EN
23
- Fig. S1
- Fig. S2
- Fig. S3
- Fig. S4
- Fig. S5