Table of Contents
Advertisement
2.4 Charging your Terminal.
There are two options available to charge your terminal, either through connecting
the power source directly to the terminal or via the terminal base:
1� Connecting base station to power:
1� Insert the power cable into the power port on the terminal base�
2� Plug the AC power cord into a wall outlet or a surge protected power board�
3� Place terminal on the base to begin charging�
2� Alternate charging method:
1� Insert the power cable to the power port found on the side of the terminal�
2� Plug the AC power cord into a wall outlet or a surge protected power board�
Note: It is recommended that you charge your terminal through the terminal base
as this will enable you to quickly return your terminal to charge mode between uses�
10
2.5 Manual Start and Shutdown.
i� Terminal Start-up:
When placed on the base, the Presto Smart VX-690 terminal will automatically
turn on� To turn on the terminal manually, hold the
until the start-up screen is displayed on the terminal�
ii� Terminal Shutdown:
Hold the
key down for 10 seconds until the terminal displays the shutdown
verification screen� Keep holding the
terminal shuts down (the terminal must be unplugged from the power supply
or removed from the base before attempting a manual shut down)�
3.0 Procedures.
3.1
Main Menu.
The terminal idle screen displays information such as the battery strength,
connection strength, Serial Number, Network name, IP address and the button
to initiate Pairing the POS�
The payment application main menu/idle screen can be accessed via the
key combo "ENTER+3"�
Please pair this
device with your
Point of Sale
(POS) system.
Serial Number: 329-301-382
Network: win_sim SSID
IP address: not connected
Pair with POS
SPI VAA screen
key down for 10 seconds
key until the Presto Smart VX-690
Presto
Connected to
'YOUR POS NAME'
Payment application screen
11
Advertisement
Table of Contents
