Table of Contents
Advertisement
3.2 Contactless Transactions.
The Presto Smart VX-690 terminal is fitted with an in-built contactless card reader,
mounted behind the screen, which enables the terminal to process contactless card
transactions�
1� When prompted by the terminal, position the contactless card above the terminal
screen�
2� Await the confirmation beeps before removing the card�
Note: Contactless transactions are currently unavailable for UnionPay cards�
3.3 Chip Card Transactions.
The Presto Smart VX-690 terminal supports chip card transactions�
The chip card reader is located at the bottom of the terminal below the keypad�
1� Position the chip card with the chip facing upward and toward the terminal�
2� Insert the chip card into the chip card reader slot in a smooth, continual motion
as far as it can go�
3� The card should remain inserted in the terminal until the transaction is complete,
and the terminal prompts you to remove it�
4� If there is an error with reading the chip on the card, the terminal may prompt you
to swipe the card�
12
3.4 Magnetic Stripe Transactions.
The Presto Smart VX-690 terminal supports magnetic stripe transactions�
The magnetic stripe reader is located on the right hand side of the terminal�
1� Position a magnetic stripe card in the card reader with the stripe facing inward,
towards the keypad�
2� To ensure a proper read of the magnetic stripe card, please insert the magnetic
stripe card from the top of the unit�
3� Swipe the card smoothly through the magnetic card reader�
4� If there is no response from the terminal, or "Card Error" message is displayed,
swipe the card again� You may be required to swipe faster or slower�
Note: If you have attempted to swipe a chip card, the terminal will prompt you
to insert the card (See Section 3�3 Chip Card transactions)�
3.5 Cancelling a transaction.
To cancel a transaction during processing, press the
key on the terminal�
Cancel Key
13
Advertisement
Table of Contents
