How To Process A Purchase With Cash Out Transaction; Initiated From The Terminal - Westpac Presto Smart VX690 User Manual

6.3 How to process a Purchase with Cash Out Transaction

initiated from the Terminal

If enabled, your terminal can process Purchase and prompt for the customer to
add a Cash Out amount during the transaction, available from Cheque or Savings
accounts only�
Note: In integration mode, all purchase transactions need to be initiated from the
POS and the Cash Out request will be prompted on the Terminal�
Step Terminal Display
1�
Total Amount
5
.00
AUD
Enter Cash Out
O
.00
AUD
Leave empty to skip
2�
Total Amount
6
.00
AUD
Tap card
Insert/Swipe
card
3�
Select Account
1. Cheque
2. Savings
3. Credit
24
Action
Once the Purchase with Cash Out transaction
has been initiated from the POS, the terminal
will immediately change to prompt for a Cash
Out amount to be entered�
If the customer does not wish to request a
Cash Out amount they can skip by pressing the
key�
The Total Amount displayed will be inclusive
of the Cash Out amount�
Insert, swipe or tap the customer's card
(See Section 3�0 Procedures)�
Select the required account "Cheque" or
"Savings" and press the touch screen or
the key�
Step Terminal Display Action
4� The cardholder can now enter their Personal
Total Amount
Identification Number (PIN)� Once entry is
complete the cardholder can press the touch
6
.00
AUD
screen or the
Note: If the customer does not wish to enter
PIN or Enter
a PIN it can be bypassed for certain card types
by leaving the PIN blank and pressing the
touch screen or the
Signature
5� The terminal will connect to the Bank and
Please Wait
begin processing the purchase�
6� If a chip card was inserted, and is yet to be
removed, this prompt will appear� Remove the
card at this prompt� The terminal will beep as a
reminder if the card is not removed�
Remove Card
7� The terminal will display the transaction result
and send the response back to the POS�
Approved
<Declined Reason>
Press ENTER Key
key�
key�
25