Step
Terminal Display
4
Please Wait
5
Remove Card
6
Approved
<Declined Reason>
Press ENTER Key
32
Action
The terminal will connect to the Bank and
begin processing the purchase�
If a chip card was inserted, and is yet to be
removed, this prompt will appear� Remove the
card at this prompt� The terminal will beep as a
reminder if the card is not removed�
The terminal will display the transaction result
and send the response back to the POS�
6.7 How to process a Purchase with Tip Transaction initiated
from the terminal.
The Tip Amount screen will only display on the Terminal if the Tipping feature has
been enabled� You may enable or disable the Tipping feature by contacting the
Merchant Helpdesk�
Step
Terminal Display
1
Total Amount
5
.00
AUD
Enter Tip
1
.50
AUD
Leave empty to skip
2
Total Amount
6
.00
AUD
Tap card
Insert/Swipe
card
3
Select Account
1. Cheque
2. Savings
3. Credit
Action
Once the Purchase with Tip transaction has
been initiated from the POS, the terminal
will immediately change to allow for a tip to
be entered�
If the customer does not wish to enter a Tip
amount they can skip by pressing the
The Total Amount displayed will be inclusive of
the Tip amount�
Insert, swipe or tap the customer's card (See
Section 3�0 Procedures)�
Select the required account and press
the touch screen or the
key�
key�
33