Note:
The information in the bottom area is provided for the programmer to fully explain how the
variable will be handled.
Note:
You MUST make sure that the variable you have declared has the desired Attribute assigned.
If you decide that you want to change a project variable's attribute, just double click on the
variable name and you can reassign the attribute for the variable.
Using the same method described above, declare the additional Boolean variables for this
example program, "SW2" and "SHUT".
When you have completed the Boolean variable assignments, the Global Boolean window
should be looked like below.
Getting Started: PAC-7186EG(D) & I-7188EG(D)/XG(D), Jul 2020 V4.0
35
.