ICP DAS USA uPAC-7186EG Getting Started page 46

2.4.2: Simulating the LD Project
A powerful program-debugging feature of the ISaGRAF software is the ability to "SIMULATE" the program
you have developed before loading it into the I-7188EG/XG &uPAC-7186EG PAC system.
After successfully compiling the example LD program, click the "SIMULATE" icon as shown below.
When you click the "Simulate" icon three windows will appear. The windows are the "ISaGRAF Debugger",
the "ISaGRAF Debug Programs", and the "I/O Simulator" windows.
If the I/O variable names you have created DO NOT appear in the I/O simulator window, just click the
[Options] > [Variable Names] and the variable names you have created will now appear next to each of the
I/O in the simulator window.
In the "ISaGRAF Debug Program" window, double click "LD1" where the cursor below is positioned. This
will open up the ISaGRAF "Quick LD Program" window and you can see the LD program you have created.
Getting Started: PAC-7186EG(D) & I-7188EG(D)/XG(D), Jul 2020 V4.0
46
.