Table of Contents
Advertisement
5. Power off the 7188, connect pin "INIT*" to "GND" then power up.
6. If the connection is OK, " > " messages will appear on the screen.
7. Type "isa7188e *b=n", Setting baud rate of COM1, n = 0~9
isa7188 *b=n
isa7188e *b=n
isa7186e *b=n
The "n" is for setting Baud rate of COM1, following is the settings:
1=2400,
6=57600,
8. Remove the connection between "INIT*" and "GND". Recycle the power.
Getting Started: PAC-7186EG(D) & I-7188EG(D)/XG(D), Jul 2020 V4.0
(for I-7188XG)
(for I-7188EG)
(foruPAC-7186EG)
2=4800,
3=9600,
7=115200,
8=300,
4=19200,
5=38400,
9=600, 0=1200
63
.
Advertisement
Table of Contents
