Table of Contents
Advertisement
No.
Q: How to record I-8017H's Ch.1 to Ch.4 voltage Input in a user allocated RAM memory in the
WinCon-8xx7? The sampling time is one record every 0.01 second. The record period is 1 to 10
57
minutes. Then PC can download this record and display it as a trend curve diagram by M.S.
Excel.
Q: How to record I-8017H's Ch.1 to Ch.4 voltage input in S256 / 512 in I-8437-80 or I-8837-80?
58
The sampling time is one record every 0.05 second. The record period is 1 to 10 minutes. Then
PC can download this record and display it as a trend curve diagram by M.S. Excel.
59
Q: Some skill to operate RS-232/422/485 serial COM Port by COM functions
60
Q: How to read / write file data in WinCon?
Q: How to connect RS-485 Remote I-7000 and I-87K I/O modules in I-8xx7, I-7188EG/XG and
61
WinCon-8xx7 PAC? How to program RS-485 remote I-7017RC, I-87017RC and I-7018Z?
62
Q: How to setup a redundant system with Ethernet I/O?
Q: Why my RS-485 remote I-7000 and I-87K Output module's host watchdog function doesn't
63
work to reset its output channels to safe output value while the RS-485 communication cable
is broken?
Q: ICP DAS release Stable and Cost-effective Data Acquisition Auto-Report System. (VC++ 6.0, VB
65
6.0 and ISaGRAF demo program are available)
Q: How to process the Integer or Real value coming from the RS-232 / RS-485 device? Like the
66
device of Bar-Code reader or RS-232 weight meter.
Q: How to send email with one attached file by WinCon-8xx7 or iPAC-8447 / 8847 or
67
uPAC-7186EG?
68
Q: Why the W-8xx7 or I-8xx7 or I-7188EG/XG always reset? How to fix it?
69
Q: Why my PC can not run "ftp" to connect W-8347 or W-8747?
70
Q: How to do Time Synchronization and record state of many ISaGRAF PACs?
Q: Application: Record 10-Ch. temperature value into a file in W-8xx7 every minute. When 24
71
hour recording is finished, send this record file by email every day.
Q: Application sample: Record Voltage / Current input by W-8xx7 every 20 ms for 1 to 10 minutes.
72
Then send this record file by email.
73
Q: Why does the I-7017 or I-87017's Current Input reading value become double or incorrect?
74
Q: How to use ISaGRAF new Retain Variable? What is its advantage?
75
Q: Why my ISaGRAF project can not connect Modbus Slave device correctly?
Q: Application sample: Record Voltage / Current input by uPAC-7186EG every second for 1 to 10
77
minutes. Then send this record file by email.
Q: Application: Record 10-Ch. temperature value into a file in uPAC-7186EG every minute. When
80
24 hour recording is finished, send this record file by email every day.
81
Q: How to measure +/-150VDC in ISaGRAF controllers plus the I-87017W-A5 I/O card?
82
Q: An easy way to program the fast FRnet remote I/O modules.
83
Q: How to set I-8x37, I-8x37-80, I-7188EG and uPAC-7186EG's TCP recycling time?
Q: Application: A Cost Effective and Hot-Swap Redundancy System by uPAC-7186EG or I-8437-80
84
plus RU-87P4/8.
Q: The WinCon-8347 / 8747 , uPAC-7186EG and iP-8447 / 8847 connecting one or several I-7530
86
to link many CAN or CANopen devices and sensors.
Q: What does it mean and how to fix it when the 7-segment LED shows error messages of Err00,
87
Err02, Err03, Err90 or E.0001 after booting the PAC?
88
Q: Function Modifications: The W-8347/8747, uPAC-7186EG, I-8x37-80, I-8xx7 and I-7188EG/XG
Getting Started: PAC-7186EG(D) & I-7188EG(D)/XG(D), Jul 2020 V4.0
English ISaGRAF Ver.3 FAQ
87
.
Advertisement
Table of Contents
