•
nd
2
.
The system then checks this drive if it can not boot from the
st
specified drive.
1
•
rd
st
3
.
If the
1
and
•
th
st
nd
If the
4
.
1
, 2
this drive.
BIOS will display an error message if the drive(s) specified is not
bootable.
Select the target boot device firstly, press
down move this item.
2.6.6
First Hard Disk Drive
This parameter specifies whether the BIOS utility will boot from an
EIDE hard disk drive or a SCSI hard disk drive. The system will
automatically boot from an EIDE hard disk if your system does not
have a SCSI hard disk drive. The default setting is SCSI.
2.6.7
Fast Boot
This parameter allows the system to boot faster by skipping some
POST routines. The default setting is
2-24
nd
2
searches fail then it boots from this drive.
rd
searches fail then it boots from
, and 3
to up move this item and press
.
Auto
to
User's Guide