Table of Contents
Advertisement
2.6.4
Boot Options
This option allows you to specify your preferred setting for bootup.
The following screen appears if you select Boot Options from the
Basic Configuration menu:
Boot Sequence
st
1
[Floppy Disk]
2
3
th
4
[LANDesk® Service Agent]
First Hard Disk Drive................. [SCSI]
Fast Boot............................. [Auto]
Silent Boot........................... [Enabled]
Num Lock After Boot................... [Enabled]
Memory Test........................... [Disabled]
Release All Blocked Memory............ [Enabled]
*Configuration Table................... [Enabled]
Boot from LanDesk Service Agent....... [Disabled]
The above parameter marked with '*' will only
appear if you access the advanced level option in
the Main Menu. Please refer to section 2.1 for
more information.
2.6.5
Boot Sequence
This parameter allows you to specify the boot search sequence during
POST.
•
st
The system checks this drive first.
1
.
Setup Utility
Boot Options
]
2-23
Advertisement
Table of Contents
