Type; Cylinder; Head; Sector - AOpen DX6G Plus Manual

The above parameters marked with '*' will only
appear if you access the advanced level option in
the Main Menu. Please refer to section 2.1 for
more information.
This parameter lets you specify the type of hard disk installed in your
system. If you want BIOS to automatically configure your hard disk,
select Auto . If you know your hard disk type, you can enter the
setting manually.
Setting this parameter also sets the Cylinder, Head, Sector, and Size
parameters.
This parameter specifies the number of cylinders of your hard disk,
and is automatically set depending on your Type parameter setting.
This parameter specifies the number of heads of your hard disk, and
is automatically set depending on your Type parameter setting.
This parameter specifies the number of sectors of your hard disk, and
is automatically set depending on your Type parameter setting.
This parameter specifies the size of your hard disk, in MB.
Setup Utility

TYPE

CYLINDERS
HEADS
SECTORS

SIZE

2-13