2.6.12
Configuration Table
This parameter allows you to enable or disable the appearance of the
configuration table after POST but before booting. The configuration
table gives a summary of the hardware devices and settings that
BIOS detected during POST.
2.6.13
Boot from LANDesk Service Agent
When set to
Enabled
, the system boots from a LANDesk Service
Agent network instead of your desktop system. The LANDesk Service
Agent is IEEE-standards-based code that intervenes in the boot
process. Please refer to your LANDesk Manual for more information.
When set to
, the system boots from the drive specified in
Disabled
the Boot Sequence parameter.
2-26
User's Guide