AOpen DX6G Plus Manual page 48

System Sleep Timer
This parameter sets the system to the lowest power-saving mode
after a specified period of inactivity. Any keyboard or mouse action or
any activity detected from the IRQ channels resumes system
operation.
This parameter lets you specify the power-saving mode that the
system will enter after a specified period of inactivity. The options are
and modes.
Standby Suspend
This parameter becomes configurable only if the System Sleep Timer
is enabled. Any keyboard or mouse action, or any enabled monitored
activities occurring through the IRQ channels resume system
operation.
2.6.2 Power Switch < 4 sec.
When set to
Power Off,
power switch is pressed for less than 4 seconds.
, the system enters the suspend mode when pressed for less
Suspend
than 4 seconds.
2.6.3 System Wake-up Event
The system wake-up event allows the system to resume operation
when the modem ring indicator is enabled.
Modem Ring Indicator
When any fax/modem activity wakes up the system from
Enabled,
suspend mode. The default setting is
2-22
SLEEP MODE
the system automatically turns off when the
Disabled.
When set to
User's Guide