AOpen DX6G Plus Manual page 71

RESET RESOURCE ASSIGNMENTS
Set this parameter to
non-PnP or PnP ISA cards. This clears all resource assignments and
allows BIOS to reassign resources to all installed PnP devices the
next time the system boots. After clearing the resource data, the
parameter resets to No .
2.10.3 Memory/Cache Options
The Memory/Cache Options allows you to configure the advanced
system memory functions.
Internal Cache(CPU Cache)........... [Enabled ]
External Cache...................... [Enabled ]
Cache Scheme...................... Write Back
Memory at 15MB-16MB Reserved for ... [System]
Memory Mode......................... [ECC]
Multi-Processor Spec. Version....... [V1.4]
Single Processor MP Table........... [Enabled]
Internal Cache (CPU Cache)
This parameter enables or disables the first-level or internal memory,
that is, the memory integrated into the CPU. The default setting is
.
Enabled
External Cache
This parameter enables or disables the external cache memory. The
external cache is incorporated in the CPU module.
Setup Utility
to avoid IRQ conflict when installing
Yes
Memory/Cache Options
2-45