AOpen DX6G Plus Manual page 42

2.5 Onboard Peripherals
The Onboard Peripheral Configuration allows you to configure the
onboard communication ports and the onboard devices. Selecting
this option displays the following screen:
Serial Port 1....................... [Enabled ]
Base Address..................... [3F8h]
IRQ.............................. [4]
Serial Port 2....................... [Enabled ]
Base Address..................... [2F8h]
IRQ.............................. [3]
Parallel Port....................... [Enabled ]
Base Address..................... [378h]
IRQ.............................. [7]
Operation Mode................... [Standard]
ECP DMA Channel................ [-]
•
Onboard Device Settings
2.5.1 Serial Ports 1 and 2
These parameters allow you to enable or disable serial ports 1 and 2.
Base Address
This function lets you set a logical base address for serial ports 1 and
2. The options are:
• •
3F8h 2F8h
2-16
Onboard Peripherals
•
3E8h
•
2E8h
User's Guide