AOpen DX6G Plus Manual page 19

1.8 Installing Expansion Cards
1.8.1 Installing PCI Cards
To install PCI cards:
1. Locate the PCI slots on the system board.
2. Remove the bracket on the housing opposite an empty PCI slot.
3. Insert a PCI card into the slot.
properly seated.
4. Secure the card to the housing with a screw.
When you turn on the system, BIOS automatically detects and
assigns resources to the PCI devices.
1.8.2 Installing ISA Cards
Both PnP and non-PnP ISA cards require specific IRQs.
installing ISA cards, make sure that the IRQs required by these cards
are not previously assigned to PCI devices to avoid resource conflicts.
System Board
Make sure that the card is
When
1-19