AOpen DX6G Plus Manual page 45

Onboard Device Settings
Floppy Disk Controller.............. [Enabled ]
IDE Controller...................... [Both
PS/2 Mouse Controller............... [Enabled ]
USB Host Controller................. [Enabled ]
USB Legacy Mode................... [Disabled]
Onboard SCSI........................ [Enabled ]
Boot from SCSI Device............. [Enabled ]
SMBus Interrupt(IRQ9)............... [Disabled]
Onboard Ethernet Chip............... [Enabled ]
Alert on LAN........................ [Disabled]
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk
controller.
IDE Controller
Set this parameter to
controller; Both to enable both primary and secondary IDE
controllers; or
Disabled
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse
controller.
USB Host Controller
This parameter lets you enable or disable the USB controller on
board. When enabled, it activates the USB function of the system.
When disabled, it deactivates the function.
Setup Utility
to enable only the primary IDE
Primary
to disable all IDE controllers.
]
2-19