Behavior Of The Aw-3 Device When The Power Is Turned On - JUKI AW-3S Instruction Manual

D
<Memory switch data
(level 2) list screen>

3-7. Behavior of the AW-3 device when the power is turned ON

When or is pressed after the power is turned ON, the AW-3 carries out its initialization op-
eration if it is operated for the first time.
The AW-3 device operates when the power is turned ON, on the assumption that bobbins
wound with thread are loaded in the hook and in the bobbin setting section. If the power to
the device is turned ON in other situation, it is necessary to operate the AW-3 to load the
bobbins. (Refer to
(2) Selecting the button of memory switch to be changed
Press
change.
For the memory switch data (level 2) other than "
refer to the Engineer's Manual.
C
"3-9. Basic operation and setting" p.16
– 14 –
C to select data item D you want to
for details.)
" ,